Skip to main content
This workflow guides you through importing a PVsyst module file (.pan format) into PlantPredict, reviewing the converted parameters, and saving the module for use in predictions.

​
Overview

PAN files are the native module format used by PVsyst. PlantPredict can import these files and automatically convert the PVsyst parameters to PlantPredict’s Single Diode Model format. Prerequisites: Valid .pan file from PVsyst

​
Workflow

1

Navigate to the Module Library

Click Modules in the Sidebar Navigation to open the Module Library.
2

Open the Add New Module Dialog

Click Add New Module at the top of the Module Library. See Add New Module for details on all available options.
3

Upload the PAN File

Click Upload PAN File under “Other Options”, then select your .pan file from the file explorer. PlantPredict automatically converts the PVsyst parameters during upload.
4

Review the Imported Module

The Module File editor opens with the converted data. Review each tab to verify the parameters imported correctly:
  • Physical & Nameplate — Verify manufacturer, model, cell technology, cell count, STC ratings, and temperature coefficients against the original datasheet
  • 1-Diode — Confirm the single diode parameters appear reasonable (see Single Diode Model)
  • Charts — Check that relative efficiency curves show expected low-light behavior
  • Remaining Tabs — Review Spectral, IAM, Shading, and Modeling Defaults as needed
Some PVsyst parameters may not have direct equivalents in PlantPredict. Cross-reference key values with the manufacturer datasheet to ensure accuracy.
5

Make Necessary Edits

Edit any parameters that require adjustment. Common updates include reformatting the module name, updating the data source, and adjusting modeling defaults to match your organization’s standards.
6

Save the Module

Click Save Module to save to your Module Library with Draft Private status. After validation, consider changing the status to Active to make it available to your organization.